Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Home License option

I currently downloaded XG and installed it as a VM to attempt to populate as much as possible by hand into XG. When I logged in I noticed that my license is only for 30 days. I am aware that tools for migration from UTM-9 are coming mid-2016 but I am bumping my 50 IP mark on a regular basis and was going to attempt to manually populate a XG VM with as much as possible, create a backup, install XG on my UTM 9 hardware (Software Install) and import backup that I created from the VM, hoping this would work and with final downtime.

TIA



This thread was automatically locked due to age.
Parents
  • Hi, guys, we're still in the process of getting the documentation uploaded. And I notice the message at the top of the Home Use email says 30-days, this needs to be corrected (both the license and the email).

    However, all the information you should need to get up and running is in the email sent to you after filling out the online forms... here's a copy... and note where the serial number is near the bottom of the instructions...

    To get started:

    You can refer to the documentation for complete details on the following steps:

    1. Install the downloaded image on your preferred hardware or virtual environment (Note: the installation will overwrite the previous operating system and all files).

    2. Upon starting for the first time, access the setup screen at https://172.16.16.16:4444 (Note: it may take a few minutes for the necessary services to start before the setup screen is ready).

    3. When you are prompted the default administrator credentials are:
    Username: admin
    Password: admin

    4. Make sure the device is setup for internet access (required for activation): change the network settings from the Basic Setup screen if necessary.

    5. Enter your serial number (provided below) into the setup screen and click "Activate Appliance".

    6. Then register your device with your MySophos ID by clicking "Register Device" and entering your MySophos ID and password that you used to download the software.

    7. Once the device is registered, you can initiate License Synchronization and proceed with the rest of the configuration.

    Your Serial Number:
    C0111111111111111

    Please refer to the documentation to make sure your evaluation goes smoothly: www.sophos.com/.../documentation.aspx.

    Need help?

    If you have questions at any point during your free trial please visit our knowledgebase, review our how-to guides, or contact us. And, as a courtesy to you, a Sophos representative will contact you shortly to discuss your evaluation and to answer your questions.

    How to buy

    If you like what you see and would like to purchase our software, please contact your nearest Sophos office or Sophos Partner.

Reply
  • Hi, guys, we're still in the process of getting the documentation uploaded. And I notice the message at the top of the Home Use email says 30-days, this needs to be corrected (both the license and the email).

    However, all the information you should need to get up and running is in the email sent to you after filling out the online forms... here's a copy... and note where the serial number is near the bottom of the instructions...

    To get started:

    You can refer to the documentation for complete details on the following steps:

    1. Install the downloaded image on your preferred hardware or virtual environment (Note: the installation will overwrite the previous operating system and all files).

    2. Upon starting for the first time, access the setup screen at https://172.16.16.16:4444 (Note: it may take a few minutes for the necessary services to start before the setup screen is ready).

    3. When you are prompted the default administrator credentials are:
    Username: admin
    Password: admin

    4. Make sure the device is setup for internet access (required for activation): change the network settings from the Basic Setup screen if necessary.

    5. Enter your serial number (provided below) into the setup screen and click "Activate Appliance".

    6. Then register your device with your MySophos ID by clicking "Register Device" and entering your MySophos ID and password that you used to download the software.

    7. Once the device is registered, you can initiate License Synchronization and proceed with the rest of the configuration.

    Your Serial Number:
    C0111111111111111

    Please refer to the documentation to make sure your evaluation goes smoothly: www.sophos.com/.../documentation.aspx.

    Need help?

    If you have questions at any point during your free trial please visit our knowledgebase, review our how-to guides, or contact us. And, as a courtesy to you, a Sophos representative will contact you shortly to discuss your evaluation and to answer your questions.

    How to buy

    If you like what you see and would like to purchase our software, please contact your nearest Sophos office or Sophos Partner.

Children
No Data