This version adds v17.5 MR10 to v18.0 GA-Build339 upgrade and config migration support.
This version introduces the ability to disable SSL/TLS inspection rules, with a new toggle switch on Rules and Policies > SSL/TLS inspection rules. This is set to ‘Off’ by default for customers upgrading from SFOS version 17.5, to avoid potential behavioral changes on upgrade. You must turn it on to enable the new Xstream SSL/TLS decryption functionality, including the SSL/TLS traffic statistics son Control Center.
When SSL/TLS inspection is set to ‘On:
When SSL/TLS inspection is set to ‘Off’:
There is an additional control in Rules and Policies > SSL/TLS inspection rules > SSL/TLS inspection settings > Advanced settings labeled ‘SSL Engine’. If this is set to ‘Disable’, the SSL/TLS inspection engine will not be used at all. This option is only intended to be used for troubleshooting as directed by Sophos Support. When ‘SSL Engine’ is set to ‘Disable’:
Plus, Several important issues have been resolved:
Please refer XG Firewall v18 highlights for more details on all-new Xstream Architecture delivering extreme new levels of visibility, protection and performance. Also, check out our XG Firewall v18 playlist on YouTube to find out what's new in XG Firewall v18!
As usual, this firmware update is no charge for all licensed XG Firewall customers. The firmware will be rolled-out automatically to all systems over the coming weeks but you can access the firmware anytime to do a manual update through MySophos.
For fresh installations, please find the following installer images:
Check out the relevant sections of the XG v18 release notes for details on:
Free Online Training
Customer Resources and How-To Videos
Take advantage of Partner and Sophos Professional Services
Here are some direct links to helpful resources:
New to XG Firewall?
If you’re new to XG Firewall, see how it provides the world’s best network visibility, protection and response on the new XG Firewall website.
Download links does not work - being redirected to community.sophos.com/.../135412
Fail again. v18 ISO install will leave a XG125W stuck at startup at the Shell prompt. No further boot process.
It's so hard to remain polite.
ISO install does not work XG125W is stuck at startup at the Shell prompt.
but the links do not work, files cannot be downloaded.
<a href="njuifile.site/">new jersey unemployment
Also on Legacy Network Adapters with Hyper-V 2012, you get about half throughput just in case anyone was interested.