STP protocol

Saw your port this morning.  I beg to differ, as this is from my switch configuration / CLI.  Its says spanning-tree !!

If you want to set it I recommend you study Cisco Docs for CBS350 series, and tread GRACEFULLY, I don't have a clue as whether changes made from CLI will work with Sophos Central.  I highly recommend that you create a backup prior to embarking on this adventure.

CLI on Sophos 

set gvrp enable

spanning-tree mode mst

spanning-tree priority 32768

spanning-tree transmit hold-count 6

spanning-tree mst hello-time 2

spanning-tree mst forward-time 15

spanning-tree mst max-age 20

no spanning-tree

spanning-tree mst configuration

name c8:4f:86:62:8b:f1

revision 0

Hi AstaroNBack  and Harry van Voorthuijsen ,

Thanks for your patience and I stand corrected on the last information I have shared above. I was thinking at STP Guard/BPDUGuard (which is not yet available) and got mixed up with STP then proposed LBD instead. Nonetheles, STP/MST/RSTP is already supported on Sophos Switches: https://www.sophos.com/en-us/products/sophos-switch/features - 

With regards to the online help/documentation guide. I may have to check with the team. Kindly allow us some time to further check on this. 

Thank you for your patience and thank you for choosing Sophos.

Regards,

Hi AstaroNBack  and Harry van Voorthuijsen ,

Thanks for your patience and I stand corrected on the last information I have shared above. I was thinking at STP Guard/BPDUGuard (which is not yet available) and got mixed up with STP then proposed LBD instead. Nonetheles, STP/MST/RSTP is already supported on Sophos Switches: https://www.sophos.com/en-us/products/sophos-switch/features - 

With regards to the online help/documentation guide. I may have to check with the team. Kindly allow us some time to further check on this. 

Thank you for your patience and thank you for choosing Sophos.

Regards,

Sharing some update related to this post.:  Sophos Switch Firmware 01.4.1466 (MR4)-Maintenance Release  on this MR release, STP BPDU guard and Root Guard is now available. Thanks