Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 5 subscribers
  • Views 4063 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Change Webapplication Root Path

SMCForumUser

Hi,

is it possible to change the root path of the application? After a normal install the application runs under the root (https://fqdn/).

We have an access gateway that acts as an reverse proxy and the communication of devices and SSP should be over the url https://fqdn/mdm/).

I've tried to change the Config Database Settings config.core.ApplicationRoot and config.core.ServletRoot but with no success.

thanks and regards

Rene

:22363


This thread was automatically locked due to age.
Parents
  • 0

    Hi:

    We are also looking to do the same thing.  We want to restrict access to the root console (only accessible on our internal network) but allow external access to the self service portal (via internet).

    Thanks,

    Shawn

    :23133
Reply
  • 0

    Hi:

    We are also looking to do the same thing.  We want to restrict access to the root console (only accessible on our internal network) but allow external access to the self service portal (via internet).

    Thanks,

    Shawn

    :23133
Children
No Data
Unfiltered HTML