Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 17 subscribers
  • Views 3268 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos ZTNA issue

Nicola Tassinari

Hi, we have an issue with a resource published throguh ZTNA.

Is an old filserver running on win server 2003 sp2, we created resource on the right gateway (CIFS on port 445), we start connection through ZTNA all is working fine but user cannot authenticate (all other resources are working properly, user can auth when is on office)

There is something in ZTNA which block old resources or so?

Any suggestion?



This thread was automatically locked due to age.
Parents
  • 0

    Essentially you need to check, what Authentication does not work: If you get an Auth Error by your CIFS, it is an issue related by your ressource. ZTNA offers you a secure tunnel, but not adjust the ressource traffic. So the client to server communication is 100% the same like you are connected directly to the server. 

    __________________________________________________________________________________________________________________

Reply
  • 0

    Essentially you need to check, what Authentication does not work: If you get an Auth Error by your CIFS, it is an issue related by your ressource. ZTNA offers you a secure tunnel, but not adjust the ressource traffic. So the client to server communication is 100% the same like you are connected directly to the server. 

    __________________________________________________________________________________________________________________

Children
Unfiltered HTML