Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 17 subscribers
  • Views 5678 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Incoming Firewallports

Schukaroi

Hi,

I'm testing ZTNA behind a firewall (SG of course) with  a one-arm deployment.

Which firewall ports should be opened? Only 443 seems to be not enough. "Any" is working, but no one likes "any"-rules.



This thread was automatically locked due to age.
Parents
  • +1

    Why are you using a UTM? :) Wouldnt a Sophos Firewall a better match later with Sync-Sec. 

    But anyway. You only need Port 443 to the gateway. 

    __________________________________________________________________________________________________________________

Reply
  • +1

    Why are you using a UTM? :) Wouldnt a Sophos Firewall a better match later with Sync-Sec. 

    But anyway. You only need Port 443 to the gateway. 

    __________________________________________________________________________________________________________________

Children
Unfiltered HTML