Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 1 reply
  • Subscribers 0 subscribers
  • Views 6618 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Web Appliance: How to restore removed configuration steps?

ksedv

Under the configuration tab there are different post installation steps, e.g. "setup default policy", "setup default group", "create additional policies"...

Online manual say:

"When the above changes are made, or if no changes are desired, these items can be removed by clicking the Remove button to the right of each link.".

But...once it is removed, how to bring it back?

Thanks for replies.

:55922


This thread was automatically locked due to age.
Parents
  • 0

    Hi Ksedv,

    That is just a check list of things you should configure after running through the installation wizard.   You can still go into the different sections in the left hand side menu to configure them.  The checklist isn't designed to be restored.

    Petr.

    :56019
Reply
  • 0

    Hi Ksedv,

    That is just a check list of things you should configure after running through the installation wizard.   You can still go into the different sections in the left hand side menu to configure them.  The checklist isn't designed to be restored.

    Petr.

    :56019
Children
No Data
Unfiltered HTML