Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 1 subscriber
  • Views 6381 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Integred Authentification OWA

BOURDOISEAU Julien

Hello,

 

First I apologize for the quality of my english, I am french.

I have a server EXCHANGE 2016 with OWA in Active DIrectory domain. 

In my internet browser if i bypass the proxy, the integred authentification works well.

But when the PROXY is set up, when I connect to my OWA I have an authentication.

I would like to know if it is possible to configure the WEB APPLIANCE for OWA integrated authentication works and that I do not need to type my login/password.

 

Thank you



This thread was automatically locked due to age.
Parents
  • 0

    Hi Julien,

    If you wish to create a bypass for authentication you will need to complete a few steps..  here is a my authentication KB as a reference : https://community.sophos.com/kb/en-us/126599

     

    Step 1: create an authentication profile.

    configuration / system / connection profiles /

    add

    Connection profile name : OWA Bypass

    Please add IP addresses or IP ranges : 192.168.0.0/16

    save:

     

    Step 2: apply the bypass.

    configuration / system / authentication / profiles

    add the profile you just create.

    select "bypass" authentication

    add our custom OWA URL

    Name it, Save it.

     

    The change will take up to 10 mins to take effect

     

    Special note:

    If you are accessing OWA internally your probably better off to create an exclusion based on your deployment mode .. so if you using proxy, add the site to the proxied omissions, or if your using transparent create an asa rule to send the traffic directly.

    internal sites should always be committed from the appliance as its default gateway will be the WAN. 

Reply
  • 0

    Hi Julien,

    If you wish to create a bypass for authentication you will need to complete a few steps..  here is a my authentication KB as a reference : https://community.sophos.com/kb/en-us/126599

     

    Step 1: create an authentication profile.

    configuration / system / connection profiles /

    add

    Connection profile name : OWA Bypass

    Please add IP addresses or IP ranges : 192.168.0.0/16

    save:

     

    Step 2: apply the bypass.

    configuration / system / authentication / profiles

    add the profile you just create.

    select "bypass" authentication

    add our custom OWA URL

    Name it, Save it.

     

    The change will take up to 10 mins to take effect

     

    Special note:

    If you are accessing OWA internally your probably better off to create an exclusion based on your deployment mode .. so if you using proxy, add the site to the proxied omissions, or if your using transparent create an asa rule to send the traffic directly.

    internal sites should always be committed from the appliance as its default gateway will be the WAN. 

Children
Unfiltered HTML