Same issue as in the post below.
This has been on going since the 9.510-4 build. Found to be present in 9.510-4, -5, and now 9.6.
How do we get this fixed??
Same issue as in the post below.
This has been on going since the 9.510-4 build. Found to be present in 9.510-4, -5, and now 9.6.
How do we get this fixed??
I experience the very same as Jay Jay. Another symptom is that no DNS forwarders are displayed at the corresponding place (Network Services/DNS/Forwarders shows "Currently assigned forwarders: none"). UTM version is 9.600-5. I found in the logs when all this started on my system:
2018:12:21-21:50:28 vm-fw named[4809]: automatic empty zone: view default: 8.B.D.0.1.0.0.2.IP6.ARPA
2018:12:21-21:50:28 vm-fw named[4809]: automatic empty zone: view default: EMPTY.AS112.ARPA
2018:12:21-21:50:28 vm-fw named[4809]: none:99: 'max-cache-size 90%' - setting to 3686MB (out of 4095MB)
2018:12:21-21:50:28 vm-fw named[4809]: configuring command channel from '//etc/rndc.key'
2018:12:21-21:50:28 vm-fw named[4809]: reloading configuration succeeded
2018:12:21-21:50:28 vm-fw named[4809]: reloading zones succeeded
2018:12:21-21:50:28 vm-fw named[4809]: oculus driver teardown
2018:12:21-21:50:28 vm-fw named[4809]: [tid 4147907440]: [aptp_disconnect]: aptp socket has been disconnected
2018:12:21-21:50:28 vm-fw named[4809]: [tid 4147907440]: [aptp_exit] APTP cleanup done
2018:12:21-21:50:28 vm-fw named[4809]: zone 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN/no_rpz_dlz: loaded serial 1545425428
2018:12:21-21:50:28 vm-fw named[4809]: zone 0.0.127.in-addr.arpa/IN/no_rpz_dlz: loaded serial 1545425428
2018:12:21-21:50:28 vm-fw named[4809]: all zones loaded
2018:12:21-21:50:28 vm-fw named[4809]: running
2018:12:21-21:50:28 vm-fw named[4809]: zone localhost/IN/no_rpz_dlz: loaded serial 1545425428
2018:12:21-21:50:28 vm-fw named[4809]: zone 0.0.127.in-addr.arpa/IN/default: loaded serial 1545425428
2018:12:21-21:50:28 vm-fw named[4809]: zone 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa/IN/default: loaded serial 1545425428
2018:12:21-21:50:28 vm-fw named[4809]: rpz.zone:9: using RFC1035 TTL semantics
2018:12:21-21:50:28 vm-fw named[4809]: zone rpz/IN/default: zone serial (1345588987) unchanged. zone may fail to transfer to slaves.
2018:12:21-21:50:28 vm-fw named[4809]: rpz: (re)loading policy zone 'rpz' changed from 1 to 1 qname, 0 to 0 nsdname, 2084 to 2084 IP, 0 to 0 NSIP, 0 to 0 CLIENTIP entries
2018:12:21-21:50:28 vm-fw named[4809]: zone rpz/IN/default: loaded serial 1345588987
2018:12:21-21:50:28 vm-fw named[4809]: zone localhost/IN/default: loaded serial 1545425428
2018:12:21-21:53:20 vm-fw named[4809]: [tid 4147907440]: [aptp_connect]: aptp socket connect succeeded
2018:12:21-21:53:20 vm-fw named[4809]: resolver priming query complete
2018:12:21-21:55:02 vm-fw named[4809]: resolver priming query complete
2018:12:21-21:58:49 vm-fw named[4809]: resolver priming query complete
2018:12:21-22:00:01 vm-fw named[4809]: resolver priming query complete
2018:12:21-22:10:02 vm-fw named[4809]: resolver priming query complete
2018:12:21-22:17:02 vm-fw named[4809]: resolver priming query complete
2018:12:21-22:17:32 vm-fw named[4809]: resolver priming query complete
2018:12:21-22:20:01 vm-fw named[4809]: resolver priming query complete
2018:12:21-22:25:02 vm-fw named[4809]: resolver priming query complete
2018:12:21-22:40:02 vm-fw named[4809]: resolver priming query complete
2018:12:21-22:42:39 vm-fw named[4809]: resolver priming query complete
2018:12:21-22:47:02 vm-fw named[4809]: resolver priming query complete
2018:12:21-22:47:32 vm-fw named[4809]: resolver priming query complete
2018:12:21-23:00:01 vm-fw named[4809]: resolver priming query complete
2018:12:21-23:10:02 vm-fw named[4809]: resolver priming query complete
2018:12:21-23:17:02 vm-fw named[4809]: resolver priming query complete
2018:12:21-23:17:32 vm-fw named[4809]: resolver priming query complete
2018:12:21-23:20:01 vm-fw named[4809]: resolver priming query complete
2018:12:21-23:25:02 vm-fw named[4809]: resolver priming query complete
2018:12:21-23:40:01 vm-fw named[4809]: resolver priming query complete
2018:12:21-23:47:02 vm-fw named[4809]: resolver priming query complete
2018:12:21-23:47:32 vm-fw named[4809]: resolver priming query complete
2018:12:21-23:55:02 vm-fw named[4809]: resolver priming query complete
2018:12:22-00:00:01 vm-fw named[4809]: resolver priming query complete
On the other hand, DNS is apparently working.
Bob, so you think this error is a result of some other DNS misconfiguration? With no other changes, why is this error not present in older UTM versions?
Jay, my wag is that this is a situation where the Up2Date process slightly mangled your configuration database - that seems to occur in less than 0.1% of UP2Dates, maybe less than 0.01%. If you have a backup from before the first Up2Date to 9.510, try restoring that to see if the problem disappears. Any luck with that?
Cheers - Bob
Looking at my UTM logs I find that I am seeing the same repeating DNS Proxy log entry as Jay. I have no other symptoms and my DNS forwarder configuration looks normal. My logs show that this "resolver priming" entry started immediately after upgrading from 9.509-3 to 9.510-5. I have restored a configuration from 9.509-3 but the log entries continue. Other than this log entry my UTM is functioning perfectly. I am currently at version 9.600-5. I know I'm not offering any info here that solves this but thought I would share what another user is seeing.
Rick
Looking at my UTM logs I find that I am seeing the same repeating DNS Proxy log entry as Jay. I have no other symptoms and my DNS forwarder configuration looks normal. My logs show that this "resolver priming" entry started immediately after upgrading from 9.509-3 to 9.510-5. I have restored a configuration from 9.509-3 but the log entries continue. Other than this log entry my UTM is functioning perfectly. I am currently at version 9.600-5. I know I'm not offering any info here that solves this but thought I would share what another user is seeing.
Rick
Looks like this is a bug in the Bind DNS resolver. The Bind user groups started reporting this behaviour last year. I'm guessing we got a Bind update with the UTM upgrade to 9.510-5 which introduced the bug to UTM. This is said to only be an annoyance in the logs and does not affect DNS performance.
Rick
Rick, I'd say it may affect performance. A log entry is generated for each dns lookup. If there are many going on at once, all this activity would surely affect performance, no?
Any way to revert back to an older bind version?
From what I read in the Bind user forum performance degradation did not seem to be an issue. I see no performance issues ether and only noticed the log entries because your post made me look at my logs. Your mileage may vary. Also, the log entry doesn't seem to be triggered by a DNS lookup but happens regularly without lookup activity.
The only way I know of to go back to the older Bind version is to go back to UTM version 9.509 before this Bind issue occured.
Rick
