Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 6 subscribers
  • Views 45325 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP55 and mesh network

wolfbeast
Hi guys,

Just a simply question does AP55 Work with mesh network ?

Regards,


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to rfcat_vk

    Just got 2 AP55's and made a 2.4ghz  mesh network. Then I started to do a 5 ghz mesh network and when I hit save. It said 5ghz mesh network is not supported. If not supported then why does it have the setting to set a 5 ghz mesh network up but you can't save it.


    It has been since Oct 2015 meshing was implemented for the AP55 only for 2.4ghz. When is mesh network going to be supported for 5ghz?

    Thanks

  • 0 in reply to JasonLenn

    2.5 years later it still isn't supported according to this matrix: community.sophos.com/.../127948

  • 0 in reply to PreHCM-PK

    Hi all,

    I have a mesh network running on UTM with AP55, admittedly only on the 2.4GHz frequency, but it is working. I had a few issues last year but tese were fixed.

    AP50 can mesh using the 5GHz as well 

    XG & UTM Architect (Systems: XG v18 & UTM 9.7 - Virtual, HW & SW)
    Curious enough to take it apart, skilled enough to put it back together, Clever enough to hide the extra parts when I'm Done!

Unfiltered HTML