This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RWA help!

Can anyone let me know or guide me if Microsoft "remotewebaccess" has been successfully configure for 2012R2 essential? It's 2:30am and i'm still trying to figure out how to get this thing to work. I'd Google it and follow a few direction without any success on my home UTM, essential just kept failing to detect the server connectivity. I don't know if I have to get the original cert to load in the utm to work or i'm just missing something. This is one of the instruction I follow without any success.

Fastvue Sophos Reporter How To Publish Websites with Sophos UTM Web Server Protection

If you guys have any idea please chime in, i'm stuck.

Thanks fellas.

This thread was automatically locked due to age.

Parents

0 Scott_Klassen over 9 years ago

Do you have Automatic Firewall Rule checked in the DNAT? For troubleshooting purposes, you may want to also enable Log Initial Packets, so you can see the traffic in the firewall log. Change For Traffic From: Any to InternetIPv4.

Very Important: You are testing from a machine out on the internet, correct? Do NOT test this DNAT from a machine in your network. It will not work without further configuration (http://www.sophos.com/en-us/support/knowledgebase/115191.aspx), and possible more depending on if you are using the web filtering proxy.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel
0 1clicc over 9 years ago in reply to Scott_Klassen

Do you have Automatic Firewall Rule checked in the DNAT?  For troubleshooting purposes, you may want to also enable Log Initial Packets, so you can see the traffic in the firewall log.  Change For Traffic From: Any to InternetIPv4.

Very Important:  You are testing from a machine out on the internet, correct?  Do NOT test this DNAT from a machine in your network.  It will not work without further configuration (UTM: Accessing Internal or DMZ servers from Internal Networks using DNAT), and possible more depending on if you are using the web filtering proxy.

Well ... yeah.  I'm testing inside my network. I'll check the log and inspect it.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 1clicc over 9 years ago in reply to Scott_Klassen

Do you have Automatic Firewall Rule checked in the DNAT?  For troubleshooting purposes, you may want to also enable Log Initial Packets, so you can see the traffic in the firewall log.  Change For Traffic From: Any to InternetIPv4.

Very Important:  You are testing from a machine out on the internet, correct?  Do NOT test this DNAT from a machine in your network.  It will not work without further configuration (UTM: Accessing Internal or DMZ servers from Internal Networks using DNAT), and possible more depending on if you are using the web filtering proxy.

Well ... yeah.  I'm testing inside my network. I'll check the log and inspect it.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data