This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WAS - CMS problems

Hi every body,

After many try to activate and configure WAS i finally did it.
But now i have other problem. When WAS is on i can't update sites. I'm using Joomla CMS.
I can log in successfully in administration area but when i want to save a content the SAVE button doesn't work.

Thanks in advance.

This thread was automatically locked due to age.

Parents

0 Scott_Klassen over 13 years ago

Can you save things when the Admin CP is accessed from the local LAN?

Let's try a quick test to determine if the issue is WAF related or not. If you disable WAF and setup connectivity to the site with a DNAT, do you still have the saving problem?

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Scott_Klassen over 13 years ago

Can you save things when the Admin CP is accessed from the local LAN?

Let's try a quick test to determine if the issue is WAF related or not. If you disable WAF and setup connectivity to the site with a DNAT, do you still have the saving problem?

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 anwar.gani over 13 years ago in reply to Scott_Klassen

Actually i'm using DNAT. I can do every thing. Also from the LAN.
To secure our webserver we are using Intrusion Prevention (Network security).
But we want use WAS to have more security.
Cancel
Vote Up 0 Vote Down

Cancel