Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 1 subscriber
  • Views 3656 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WAF not working on Bridge setup.

howit
Hello,

I'm having a issue enabling WAF for my website, which has default gateway pointing to astaro's IP.

Astaro is running as a bridge.

I've enabled the WAF but I dont get any requests.

All I done was to create a Real Server with my web server IP, then create a virtual server with my domain, using the real server. Then the last step was enabling WAF. am I missing something?

thank you


This thread was automatically locked due to age.
Parents
  • 0
    that the WAF can't capture the traffic "transparently" - that the traffic must have the Astaro as the destination.


    In your situation, I interpret this as meaning that, if www.domain.com -> 189.34.x.201, then 189.34.x.201 should be an address on your Astaro's bridged interface and the web server should have a different IP.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    that the WAF can't capture the traffic "transparently" - that the traffic must have the Astaro as the destination.


    In your situation, I interpret this as meaning that, if www.domain.com -> 189.34.x.201, then 189.34.x.201 should be an address on your Astaro's bridged interface and the web server should have a different IP.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML