Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 4 subscribers
  • Views 3309 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WAF Webserverprotection Problem

Mohamed Moafi

I have a problem with the UTM9 Firmware 9.707-5 Pattern version:  204432

We have a web portal, but users are being disconnected at 9:30 Pm every day . In the log i'm seeing several errors.


2021:10:29-21:56:16 fw httpd[3068]: [proxy:error] [pid 3068:tid 3785116528] AH00959: ap_proxy_connect_backend disabling worker for (Server IP Address) for 60s

2021:10:29-21:56:16 fw httpd[3068]: [proxy_http:error] [pid 3068:tid 3785116528] [client 197.197.134.166:59877] AH01114: HTTP: failed to make connection to backend: Server IP Address

any ideas

???



This thread was automatically locked due to age.
Parents
  • 0

    That is usually an error you see with Apache webservers, MySQL needing to be restarted, or needing to add a 'retry=0' to to the config if its a VM.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

  • 0 in reply to Amodin

    The web app on sharepoint  and we use MSSQL all on VMs. So where i add the 'retry=0' 

    Where in UTM ?

  • 0 in reply to Mohamed Moafi

    It wouldn't go in the UTM, it's for VM host configurations.  I don't know your setup and offered that as a possible solution.  If you are using a hardware device specific for a UTM, I don't know that UTM itself has a command line config for the same thing.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

Reply
  • 0 in reply to Mohamed Moafi

    It wouldn't go in the UTM, it's for VM host configurations.  I don't know your setup and offered that as a possible solution.  If you are using a hardware device specific for a UTM, I don't know that UTM itself has a command line config for the same thing.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

Children
No Data
Unfiltered HTML