Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 19 replies
  • Answers 1 answer
  • Subscribers 5 subscribers
  • Views 5320 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

The introduction to new ui requires boolean data.

JohnYewdall
Firmware version: 9.713-19
Pattern version:

217163

Home license

Web Protection - Filtering Options - Misc

Misc Settings or Transparent Mode Skiplist

Attempting to do some housekeeping after years of neglect. Any change or even just hitting Apply without any change throws up in red 

The introduction to new ui requires boolean data.

 and any changes are not applied.



This thread was automatically locked due to age.
  • 0

    Bot being botty.  Or spewing some blather about nothingness.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

  • 0 in reply to Amodin

    I take it you haven't encountered this problem then.

  • 0 in reply to JohnYewdall

    I have no idea what you are even trying to convey here.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

  • 0 in reply to Amodin

    In Webfiltering Misc options I have a number of sites whose http traffic is not intercepted by the transparent proxy service.  Any attempt to modify them creates an error. 

  • 0 in reply to JohnYewdall

    What does your skip list look like?  Can you post a screen shot here.  Do you have any logs showing the block?

    Have you tried a different browser to edit your list?  Which browser are you using? (Some browsers have been known to not play nice at times with UTM).

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

  • 0 in reply to Amodin

    Browsers used are Brave and Firefox. it is just a short list of half a dozen domains.  Also I cannot make any change on the Misc page such as changing the Web Filtering port or Enforce strict HTTP 1.0/1.1

  • 0 in reply to JohnYewdall

    The web filtering log when I turn on the proxy server looks like this: (my emphasis)

     

    2022:12:11-22:42:51 another httpproxy[23535]: id="0003" severity="info" sys="SecureWeb" sub="http" request="(nil)" function="main" file="httpproxy.c" line="286" message="reading configuration"
    2022:12:11-22:42:51 another httpproxy[23535]: id="0003" severity="info" sys="SecureWeb" sub="http" request="(nil)" function="main" file="httpproxy.c" line="312" message="caching templates"
    2022:12:11-22:42:51 another httpproxy[23535]: id="0003" severity="info" sys="SecureWeb" sub="http" request="(nil)" function="main" file="httpproxy.c" line="315" message="reading profiles"
    2022:12:11-22:42:51 another httpproxy[23535]: id="0003" severity="info" sys="SecureWeb" sub="http" request="(nil)" function="disk_cache_read" file="diskcache.c" line="1766" message="calculated md5sum: [D41D8CD98F00B204E9800998ECF8427E], file md5sum: [D41D8CD98F00B204E9800998ECF8427E]"
    2022:12:11-22:42:52 another httpproxy[23535]: id="0003" severity="info" sys="SecureWeb" sub="http" request="(nil)" function="scanner_init" file="aptpscanner.c" line="167" message="oculusd port = 25000 ; initializing ATP..."
    2022:12:11-22:42:52 another httpproxy[23535]: id="0003" severity="info" sys="SecureWeb" sub="http" request="(nil)" function="scanner_init" file="aptpscanner.c" line="172" message="ATP loaded"
    2022:12:11-22:43:01 another httpproxy[23535]: id="0003" severity="info" sys="SecureWeb" sub="http" request="(nil)" function="scanner_init" file="saviscanner.c" line="521" message="Successfully loaded SAVI threat data, engine 3.86.1, threat data 5.84 from 11/5/2021 (62329106 detected threats)"
    2022:12:11-22:43:01 another httpproxy[23535]: id="0003" severity="info" sys="SecureWeb" sub="http" request="(nil)" function="libnavl_log" file="navl_externals_posix.c" line="43" message="E: InitInstance: Error initializing instance of plugin HPACK_UTIL"
    2022:12:11-22:43:13 another httpproxy[23535]: id="0003" severity="info" sys="SecureWeb" sub="http" request="(nil)" function="avirascanner_log" file="avirascanner.c" line="66" message="Successfully initialized Avira SAVAPI library 4.15.13, expires 20230227, AVE 8.3.66.0, VDF 8.19.29.214 (8807844 signatures)"
    2022:12:11-22:43:15 another httpproxy[23535]: id="0003" severity="info" sys="SecureWeb" sub="http" request="(nil)" function="main" file="httpproxy.c" line="356" message="notifiying argos daemon"
    2022:12:11-22:43:15 another httpproxy[23535]: id="0003" severity="info" sys="SecureWeb" sub="http" request="(nil)" function="argos_notify" file="httpproxy.c" line="210" message="connect: Connection refused"
    2022:12:11-22:43:15 another httpproxy[23535]: id="0003" severity="info" sys="SecureWeb" sub="http" request="(nil)" function="main" file="httpproxy.c" line="362" message="finished startup"
    2022:12:11-22:43:15 another httpproxy[23535]: Integrated HTTP-Proxy (c) 2007-2016 Sophos Ltd, Release 328.g0f2a61aa.rb2
  • 0 in reply to JohnYewdall

    This may be a years-old issue - maybe five or so years with Web Protection?  It may be database corruption. Simplist attempt first and a wild guess:

    You can SSH in and try to rebuild your database.  It erases history but you do keep your logs:

         /etc/init.d/postgresql92 rebuild

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

  • 0 in reply to Amodin

    another:/root # cd /root
    another:/root # /etc/init.d/postgresql92 rebuild
    Rebuilding PostgreSQL database, all reporting data will be lost!
    Enter "yes" to continue...
    yes
    :: Stopping PostgreSQLcould not change directory to "/root"
    done
    :: Initializing the PostgreSQL databasecould not change directory to "/root"
    done
    :: Starting PostgreSQL done
    :: Restarting SMTP Proxy
    :: Stopping SMTP Proxy
    [ ok ]
    :: Starting SMTP Proxy
    [ ok ]
    [ ok ]
    another:/root #

    No change

  • 0 in reply to JohnYewdall

    Hi John and welcome to the UTM community!

    You need to execute the command as root.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Unfiltered HTML