This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Errors trying to regenerate certificates (Heartbleed mitigation)

Hi all,

My home UTM is throwing an error when I try regenerate certificates and signing CA under the Remote Access->Certificate Management->Advanced:

The Confd reported an error without providing any details.

Any ideas? FWIW, I was able to reset my WebAdmin cert without any trouble.

This thread was automatically locked due to age.

Parents

0 BAlfson over 10 years ago

Yes, I'm sure you're right though I've not done this at a site that has REDs. The RED configuration depends on certificates that will have changed. You will need to re-install the REDs, so you will need the 'Unlock code' from each.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BAlfson over 10 years ago

Yes, I'm sure you're right though I've not done this at a site that has REDs. The RED configuration depends on certificates that will have changed. You will need to re-install the REDs, so you will need the 'Unlock code' from each.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data