Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 15 replies
  • Subscribers 1 subscriber
  • Views 11781 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL VPN: Client to Client communication

lheinemann
Dear everybody,

I have currently implemented an SSL Client VPN which works perfectly fine for my routed networks (tunnel).

I am wondering how it is possible to have the VPN IP Pool ( 10.242.2.x ) routed through the tunnel as I want to have the possibility to communicate whith each connected VPN client vice versa.

Once I add the VPN IP Pool to the Local Network group my client starts not being able to connect to the astaro gateway anymore.

Any thoughts on this ?

Thanks in advance.

Lars


This thread was automatically locked due to age.
Parents
  • 0
    Hi, Ruben, and welcome to the User BB!

    For example:

    Traffic Source: Any
    Traffic Service: Any
    Traffic Destination: Ruben-Static {a DNS Host object you define with a fixed address}

    NAT mode: Full NAT

    Destination: Ruben (User Network) {this is the object created by WebAdmin when the user "Ruben" was defined}
    Destination Service: {leave blank}

    Source: Internal (Address) {this is the object created by WebAdmin when the interface was defined}
    Source Service: {leave blank}



    Did that help?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Hi, Ruben, and welcome to the User BB!

    For example:

    Traffic Source: Any
    Traffic Service: Any
    Traffic Destination: Ruben-Static {a DNS Host object you define with a fixed address}

    NAT mode: Full NAT

    Destination: Ruben (User Network) {this is the object created by WebAdmin when the user "Ruben" was defined}
    Destination Service: {leave blank}

    Source: Internal (Address) {this is the object created by WebAdmin when the interface was defined}
    Source Service: {leave blank}



    Did that help?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
  • 0 in reply to BAlfson
    Hi Bob,

    Thanks for the help. Let me try this and get back to you.

    Cheers,

    Ruben

    Hi, Ruben, and welcome to the User BB!

    For example:

    Traffic Source: Any
    Traffic Service: Any
    Traffic Destination: Ruben-Static {a DNS Host object you define with a fixed address}

    NAT mode: Full NAT

    Destination: Ruben (User Network) {this is the object created by WebAdmin when the user "Ruben" was defined}
    Destination Service: {leave blank}

    Source: Internal (Address) {this is the object created by WebAdmin when the interface was defined}
    Source Service: {leave blank}



    Did that help?

    Cheers - Bob
Unfiltered HTML