This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL VPN: Client to Client communication

Dear everybody,

I have currently implemented an SSL Client VPN which works perfectly fine for my routed networks (tunnel).

I am wondering how it is possible to have the VPN IP Pool ( 10.242.2.x ) routed through the tunnel as I want to have the possibility to communicate whith each connected VPN client vice versa.

Once I add the VPN IP Pool to the Local Network group my client starts not being able to connect to the astaro gateway anymore.

Any thoughts on this ?

Thanks in advance.

Lars

This thread was automatically locked due to age.

Parents

0 BAlfson over 14 years ago

Ah, yes, Jan, I think that's correct. I was trying to remember what I did to solve a similar problem... I think I finally gave up trying to find an "elegant" solution and decided that a client-side route was the only solution when running a split tunnel.

Cheers - Bob
PS Gentle reader, please go to the next page for an elegant solution by gejsdotcom (Gunawidjaja Joseph).

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BAlfson over 14 years ago

Ah, yes, Jan, I think that's correct. I was trying to remember what I did to solve a similar problem... I think I finally gave up trying to find an "elegant" solution and decided that a client-side route was the only solution when running a split tunnel.

Cheers - Bob
PS Gentle reader, please go to the next page for an elegant solution by gejsdotcom (Gunawidjaja Joseph).

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data