This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Guides on setting up a Sophos UTM and OpenVPN access server?

Hi,

Are there any recent guides on setting up a Sophos UTM and OpenVPN access server?

The below PDF is a bit long in the tooth hopefully the ports stipulated are still relevant:

https://openvpn.net/images/pdf/OpenVPN_Access_Server_Sysadmin_Guide_Rev.pdf

I would imagine HTTPS (port 443) traffic is passed onto the OpenVPN access server and it will need to "host" the certificate?

Any guides/details will be much appreciated.

A date constrained search for:

"sophos utm" "openvpn access server" 

didn't turn up much.

John

   



This thread was automatically locked due to age.
Parents Reply Children
  • Ok, John, we know that,

    But how can we help you? What is your route you want to go?

    From my POV, you don't really "need" another VPN server, when using the UTM. Not technically, not comfortwise and not at all.

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

  • > From my POV, you don't really "need" another VPN server, when using the UTM. Not technically, not comfortwise and not at all.

    Agreed....

    I'm a 1.85 man IT shop so I'm ultimately looking for a solution where I can go on holiday and have everything burn to the ground.  Have 0.85 people with the aid of OpenVPN support bring the VPN connection back online in a reasonable period of time.  Without needing them to access the Sophos UTM.    

    Yes this will come at a financial/technical cost.

    We need to be honest, OpenVPN is a highly configurable product and will invariably be a barrier to changes and problem resolution.  Paying for their services might lessen the pain once everything is burning.

    The below page is a honest comparison without being too heavy on the sales pitch, I watched the video at 1.75 to quickly grasp the differences:
  • OK, I still don't get you.You like your idea, that's ok for me.

    But: there is no such guide.

    You simply need two DNA-rules, one forwarding UDP 1194 to your internal OpenVPN Access Server, then another one to forward TCP 443 to your internal OpenVPN-access server, That's it. I don't know what is meant by running "direct" onport 943, but this can use 443 as well (see your table above)

    You should change the port Sophos Userportal is running on to something different than 443, if you need to use that from remote.

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.