Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 6 subscribers
  • Views 12135 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Port forwarding

Justin Graybill

Hello, 

I apologize is this has been covered already. I have been searching for answer and have been unable to find/ comprehend anything. 

 

I have two internal web servers one at 172.16.0.2 and on on 172.16.75.1.  That I need to access from the web. Unfortunately the web server port is :80 on both and can not be changed. 

 

What are the steps to configure UTM9  to forward the ports  as below?

public ip:1233  is forwarded to 172.16.0.2:80 and public ip:3433 is forwarded to 172.16.75.1.

 

Thank you for the help. 



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to Justin Graybill

    Network Protection / NAT / New NAT Rule

    - Create new service definition for 1233 and 3433

    - Create new network definition for web servers 172.16.0.2 and 172.16.75.1

    - New NAT Rule as follow

       For traffic from: Any

       Using service : 1233 or 3433 see above

       Going to: External (WAN)

       Change the destination to: web server (see above)

       And the service to: port 80

    - Check automatic firewall rule

     

    Good Luck

Unfiltered HTML