This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM - Configuring Bridgemode / Transparent Bridge

Hi all,

The issue i continue to face is using a PC/Third party Hardware as an in-path transparent bridge device. I continue to read this is possible with Sophos UTM but unable to find directions to do so. I have found documentation for the regular Sophos bridge deployment but not UTM. I will gladly pay the subscription is this is possible


L2 SWITCH (LAN ==> UTM (LAN) ==> UTM (WAN) ==> Firewall (LAN 


I want to pass L2 traffic throguh this device up to the firewall. Yes there are some limitations here but the double NAT idea is not feasible for this setup

This thread was automatically locked due to age.