One of our UTMs has a single RED15W connected to give one of our road warriors access, till today this worked fine.
A few hours ago, I updated this UTMs to 9.601-5, the update itself did it's job, after reboot the UTM was up and running.
Unfortunately now the RED15W can't establish it's VPN to the UTM. I attached some lines of the UTMs RED log file.
Seems the UTM recognizes the REDs old firmware, but there is no update for the RED or at least it doesn't work.
The RED is trying to reconnect every 2minutes, without success, it's always the same error, "Disconnecting: Firmware update required. Trying provisioning service ..."
Any hints how to fix this (besides doing a new, clean install with an older UTM firmware)?
---------------
2019:02:19-13:46:06 mail red_server[8034]: SELF: Cannot do SSL handshake on socket accept from '<IP>': SSL connect accept failed because of handshake problems
2019:02:19-13:46:06 mail red_server[8035]: SELF: Cannot do SSL handshake on socket accept from '<IP>': SSL connect accept failed because of handshake problems SSL wants a read first
2019:02:19-13:46:09 mail red_server[8043]: SELF: New connection from <IP> with ID A360203FDXXXXXX (cipher AES256-GCM-SHA384), rev1
2019:02:19-13:46:09 mail red_server[8043]: A360203FDXXXXXX: connected OK, pushing config
2019:02:19-13:46:10 mail red_server[8043]: A360203FDXXXXXX: command '{"data":{"version":"0"},"type":"INIT_CONNECTION"}'
2019:02:19-13:46:10 mail red_server[8043]: A360203FDXXXXXX: Initializing connection running protocol version 0
2019:02:19-13:46:10 mail red_server[8043]: A360203FDXXXXXX: Sending json message {"data":{},"type":"WELCOME"}
2019:02:19-13:46:11 mail red_server[8043]: A360203FDXXXXXX: command '{"data":{},"type":"CONFIG_REQ"}'
2019:02:19-13:46:11 mail red_server[8043]: A360203FDXXXXXX: Sending json message {"data":{"pin":"","fullbr_dns":"","split_networks":"1.2.3.4","lan2_vids":"","lan4_vids":"","local_networks":"","tunnel_id":1,"manual2_netmask":24,"asg_cert":"[removed]","manual_address":"0.0.0.0","bridge_proto":"none","unlock_code":"tkc60a7x","password":"","manual2_defgw":"0.0.0.0","prev_unlock_code":"","manual_netmask":24,"lan3_vids":"","version_r2":"2005R2","mac_filter_type":"none","mac":"00:28:4e:14:XX:XX","dial_string":"*99#","manual2_address":"0.0.0.0","version_ng_red50":"1-330-f4c55ab8-0000000","manual_dns":"0.0.0.0","lan1_mode":"unused","username":"","activate_modem":0,"tunnel_compression_algorithm":"lzo","version_red50":"1-330-f4c55ab8-0000000","fullbr_domains":"","htp_server":"mail.hoehne.org","uplink_balancing":"failover","asg_key":"[removed]","type":"red15w","deployment_mode":"online","uplink2_mode":"dhcp","version_red15":"1-330-f4c55ab8-655eb7e","manual2_dns":"0...L1505
2019:02:19-13:46:12 mail red_server[8043]: A360203FDXXXXXX: command '{"data":{"message":"Firmware update required. Trying provisioning service ..."},"type":"DISCONNECT"}'
2019:02:19-13:46:12 mail red_server[8043]: A360203FDXXXXXX: Disconnecting: Firmware update required. Trying provisioning service ...
2019:02:19-13:46:12 mail red_server[8043]: id="4202" severity="info" sys="System" sub="RED" name="RED Tunnel Down" red_id="A360203FDXXXXXX" forced="1"
2019:02:19-13:46:12 mail red_server[8043]: A360203FDXXXXXX is disconnected.
---------------
This thread was automatically locked due to age.
