Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 2 subscribers
  • Views 12346 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help with DNAT & DVR

Lonerboi
I am setting up my DVR to be accessible from WAN, via port forwarding

I have done the following,
1)create a cctv interface
2)give it a dhcp server
3)allow it to access dns
4)define my DVR to a static ip
5)firewall rule is any>any>any
6)masquerade CCTV(network)>WAN
7)NAT DNAT any>cctv port>wan
translate to DVR
automatic firewall rule
initial packets are logged

However when i type in my http://WAN:cctv port, I am not being redirected to my DVR webpage. Anything I missed out?


This thread was automatically locked due to age.
Parents
  • 0
    Thanks for the reply,

    Yea i know all all all is bad, but its to isolate the problem.

    Yea, i'm testing this from the internet, to try to connect to my wan ip and port so that it will forward it to my dvr, any idea how this will work with UTM? I need this to work as there is a need to view the DVR remotely.
Reply
  • 0
    Thanks for the reply,

    Yea i know all all all is bad, but its to isolate the problem.

    Yea, i'm testing this from the internet, to try to connect to my wan ip and port so that it will forward it to my dvr, any idea how this will work with UTM? I need this to work as there is a need to view the DVR remotely.
Children
No Data
Unfiltered HTML