This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

9.208 BUG: Various IPS *** Caught Term-Signal

We have several customers with complaints of failure access (page loading incomplete information), all with IPS enabled and after disabling the feature, the hits just bounce right back.

Not detected any problems via logs ... could verify that this is a bug?

This thread was automatically locked due to age.

ips-2014-11-17.zip

Parents

0 Scott_Klassen over 10 years ago

Go to Management>>Up2Date. On the Configuration tab, change pattern update to manual. On the Overview tab, click the update patterns button. Review the up2date log for what it's doing. Be aware that you will need to have IPS enabled for up2date to download IPS patterns.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Scott_Klassen over 10 years ago

Go to Management>>Up2Date. On the Configuration tab, change pattern update to manual. On the Overview tab, click the update patterns button. Review the up2date log for what it's doing. Be aware that you will need to have IPS enabled for up2date to download IPS patterns.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 mikle over 10 years ago in reply to Scott_Klassen

Go to Management>>Up2Date. On the Configuration tab, change pattern update to manual. On the Overview tab, click the update patterns button. Review the up2date log for what it's doing. Be aware that you will need to have IPS enabled for up2date to download IPS patterns.

You are right - only if IPS is activ, up2date works and load the RPM file... Great :-)
Now there are some warnings about UDP flooding with OpenVPN Port 1194, but the traffic now works with full up and down bandwith. Let's see what's happening tomorrow when the users works with exchange and fileserver via IPSEC...

2014:11:30-09:35:01 firewall auisys[24081]: Searching for available up2date packages for type 'ipsbundle'
2014:11:30-09:35:01 firewall auisys[24081]: Installing up2date package file '/var/up2date//ipsbundle/u2d-ipsbundle-9.172.tgz.gpg'

firewall:/root # rpm -qa | grep ipsbundle
u2d-ipsbundle-9-172
Cancel
Vote Up 0 Vote Down

Cancel