Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 2 subscribers
  • Views 8527 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

NAT Rule not working

nitsuj
Hi


I'm currently configuring a completely new Sophos SG210 with UTM 9 
Firmware version: 9.207-19

I'm trying to port forward to an internal web server. I have setup a NAT rule and opted for the firewall rules to be created automatically.

I cannot access the website from external. 

I see an entry in the firewall log in white: 

15:21:01 NAT rule #1 TCP 192.168.0.71:54049 → 192.168.0.4:80

I don't see any traffic on the internal web server.

Any ideas, logs I should look at etc?

I have attached a screen shot of the NAT rule. 


Thanks


This thread was automatically locked due to age.
Parents
  • 0
    It means that all Network definitions should have the highlighted setting:



    Otherwise you can create routing problems.  If that wasn't it, check the other routing issues in #3.1.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    It means that all Network definitions should have the highlighted setting:



    Otherwise you can create routing problems.  If that wasn't it, check the other routing issues in #3.1.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
  • 0 in reply to BAlfson
    I have check the network definitions and they are all set to >

    In Regards to rulz #3.1. The only thing I can think is that my internal web server has the default gateway of another firewall. But I did not think this would make any difference. 

    Cheers
Unfiltered HTML