Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 2 subscribers
  • Views 28815 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

What is Static Mapping?

jalil1408
In DHCP > IPv4 Lease Table > Make Static, and regarding:
DHCP Server
DHCP Range
IPv4 Address

If I set the "IPv4 Address" to a value in the "DHCP Range", Can the "DHCP Server" offer this address to other devices?

Is this correct?
Static Mapping = Always assign an IP Address to specific MAC addresses and Prevent the DHCP Server from assigning it to other devices even if it is in the DHCP Range?


This thread was automatically locked due to age.
Parents
  • 0
    Because the DHCP server hands out the IP adresses for the static mappings.

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
  • 0 in reply to scorpionking

    Because the DHCP server hands out the IP adresses for the static mappings.


    For what purpose, can't Static Mapping work without DHCP?
Reply Children
No Data
Unfiltered HTML