Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 27 replies
  • Subscribers 3 subscribers
  • Views 30041 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Multipath Rules vs Static Routing (Policy Routes) ?

UweT
Dear Experts,

We have 3x Internet access lines using Uplink Balancing.

We are using services for online file storage accessed by WebDAV (HTTPS) mostly.

I want do force all the traffic on HTTPS to destination i.e. "PROVIDER.com" to go over our dedicated line (same upload and download), let's call it "line1".

What is the best strategy in performance regarding the Astaro overload? And what is the difference in between?:

a) using Interfaces&Routing > Static Routing > Policy Rules (Any>Any>HTTPS>provider.com>interface "line1")

or

b) using Interfaces&Routing > Interfaces > Multipath Rules (Any>HTTPS>provider.com>line1)

Thank you in advance!
Uwe


This thread was automatically locked due to age.
Parents
  • 0
    i have a configuration as follows:
    i have 2 interfaces:
        internal(i have 2 sub-nets), External(wan)

    i have 2 service providers ISP1, ISP2

       subnet1 -> any : GW1(ISP1)
       subnet2 -> any:  GW2(ISP2)

    how can I impose proxy to both routes? right now the proxy only works on one route, if i configure default Gateway.

    Is there a workaround on this problem?

    I appreciate if someone shed some light [:)]
  • 0 in reply to andre.yakub
    You assume that the external connections are from the same ISP/network provider, if they are not then you need to look at policy routing.

    If your links are from the same provider try using link aggregation in the interface and routing tab.

    Ian.

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0 in reply to andre.yakub
    You assume that the external connections are from the same ISP/network provider, if they are not then you need to look at policy routing.

    If your links are from the same provider try using link aggregation in the interface and routing tab.

    Ian.

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML