This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Proposal: Implement Proxy functionality for iview2 - can´t activate iView!!!!

Hi,

I´ve ran into a problem, as I wanted to prepare an iview2 evaluation for one of our customers. In this scenario, theres no direct internet connection available! As far as i figured out, there is no possibility to activate and uses iView2. That´s a pitty and why isn´t a proxy feature included?

Is there a way to make iview2 use a proxy with the CLI ?

Best Regards

Sebastian



This thread was automatically locked due to age.
Parents Reply Children
  • Hi,

    1. no possibility to get in touch with the main firewall administrator

    2. the only possibility to get internet access is using their proxyserver

    I can´t follow your thoughts... Let´s assume, the customer has installed an utm, for what reason should I deactivate the transparent mode? If that would be the given situation, transparent would be a working scenario to get it activated! 

  • Think of it as a proxy bypass list that will not be subject to the proxy interception. However, it's a moot point if you don't have access to the Sophos firewall or whatever firewall the client has. 

  • Same problem here.

    I could bypass my own proxy, but there is another upstream proxy which has to be used to get internet access.

    Adding proxy support to iView is the only sensible solution here. According to my UTM logs, iView tries to connect with HTTPS so that shouldn't be too hard to do.

    Regards,

    Heiko