This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

target service not allowed

Ok, I have a TON of these showing up in my log.  It's two IP's that are trying to use Cricut for the 3d software printing.  The port after www.cricut.io has several that show up.  They can range from 7043 to 7058.  Is there an easy way to get my 425 to allow those through and to slim down my logs please?

 

2017:11:29-12:15:20 firewall httpproxy[7038]: id="0002" severity="info" sys="SecureWeb" sub="http" name="web request blocked" action="block" method="GET" srcip="10.0.1.66" dstip="" user="" group="" ad_domain="" statuscode="403" cached="0" profile="REF_fWFINTEAQV (Windsor General Profile)" filteraction="REF_DefaultHTTPCFFAction (Default content filter action)" size="2531" request="0xd9c8de00" url="http://www.cricut.io:7046/" referer="" error="Target service not allowed" authtime="0" dnstime="0" cattime="0" avscantime="0" fullreqtime="447" device="0" auth="0" ua="Hyperion-Launcher/0.0.0.0" exceptions="av,auth,content,url,fileextension"

 

Thanks!

 

Donnie



This thread was automatically locked due to age.
Parents Reply Children
No Data