Well
I was finally able to get the UTM software installed on the Zotac C1327. I have it running on 8GB of RAM with an old 120GB SSD Samsung 840 I had sitting around.
The real pain was that I could not get the latest build of UTM 9 to install. I would just hang at various stages of the install saying there was a problem with the clock or that it could not detect any drives or just run extremely slow. I combed all through the BIOS turning this and that off and even installing by a USB DVD drive and then CF Reader. Nothing would work.
Until I decided to make a bootable USB install using v9.3
That's when it gave me some hope.
First go through it hung at 66%. OK, HDMI hookup. Switched to VGA and all was good.
Second issue was that it could not find install.tar .... Hmmm saw that solution some where. Ok, just run 'mount /dev/sdb1 /install' before starting the install menu.
After that we had a working system!
But, my question is this. Why did v9.3 work but not the latest version of UTM 9.5? What changed? I'm kinda wondering if I should stick with 9.3, update to 9.4 or try 9.5 again.
This thread was automatically locked due to age.
