This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ASG 110/120 upgrade to V8 with home license

Hi everyone

I have been using ASG since 2004 but only till today I owned my first hardware ASG 110/120

It is running V7 so I decided to upgrade it to V8, I am surprised that the software security gateway installer does not allow installation on ASG hardware.

NVM I am downloading hardware image now but my questions is, can I use home license on hardware asg ?

thanks

This thread was automatically locked due to age.

Parents

0 Scott_Klassen over 12 years ago

That's another way to do it. [:)] Hopefully you have one of the newer 110/120 units with 1GB of RAM, as that's the minimum needed for V8. If you have an older unit with 512MB, you'd be much better off sticking with 7.5x from a performance perspective.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Scott_Klassen over 12 years ago

That's another way to do it. [:)] Hopefully you have one of the newer 110/120 units with 1GB of RAM, as that's the minimum needed for V8. If you have an older unit with 512MB, you'd be much better off sticking with 7.5x from a performance perspective.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data