Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 4 subscribers
  • Views 12197 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Up2date installation on HA killed slave

lindin
Hi

After investigating on how to do the Up2Date-installation in an active/passive HA environment I finally felt safe doing it.

15 minutes after clicking "Upgrade to latest version now" I ended up with a DEAD slave. Now it has passed 30 minutes and still the SLAVE is dead.

The log says:

2010:02:17-22:14:35 (none) ha_daemon[3539]: id="38A2" severity="error" sys="System" sub="ha" name="Node 2 died during up2date process!"
2010:02:17-22:14:35 (none) ha_daemon[3539]: id="38C1" severity="info" sys="System" sub="ha" name="Node 2 is dead, received no heart beats!"
2010:02:17-22:14:37 (none) slon_control[3668]: Killing slon reporting [21816]
2010:02:17-22:14:37 (none) slon_control[3668]: Killing slon pop3 [21817]
2010:02:17-22:14:45 (none) ha_daemon[3539]: id="38A3" severity="debug" sys="System" sub="ha" name="Netlink: Lost link beat on eth5!"
2010:02:17-22:14:47 (none) ha_daemon[3539]: id="38A3" severity="debug" sys="System" sub="ha" name="Netlink: Found link beat on eth5 again!"
2010:02:17-22:14:56 (none) ha_daemon[3539]: id="38A3" severity="debug" sys="System" sub="ha" name="Netlink: Lost link beat on eth5!"
2010:02:17-22:14:57 (none) slon_control[3668]: Slon reporting exited with value 0!
2010:02:17-22:14:57 (none) slon_control[3668]: Slon pop3 exited with value 0!
2010:02:17-22:14:59 (none) ha_daemon[3539]: id="38A3" severity="debug" sys="System" sub="ha" name="Netlink: Found link beat on eth5 again!" 


What am I doing wrong?


This thread was automatically locked due to age.
Parents
  • 0
    Otherwise an ssh to the FW of course always brings me to the current master, right?

    That's why I suggested disconnecting the Ethernet cables.  I know that it's possible to ssh to the Slave while it's online, but I always try to insulate myself from my own mistakes.

    When I first read this, I had the same idea.  I had a similar problem; the MTU had gotten out of phase; one unit was at 1500 and the other was at 2000.  From the console, run ifconfig to see the existing MTU, then change it
     
    cc
    ha
    advanced
    mtu$
    =2000
     
    or         =1500 

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Otherwise an ssh to the FW of course always brings me to the current master, right?

    That's why I suggested disconnecting the Ethernet cables.  I know that it's possible to ssh to the Slave while it's online, but I always try to insulate myself from my own mistakes.

    When I first read this, I had the same idea.  I had a similar problem; the MTU had gotten out of phase; one unit was at 1500 and the other was at 2000.  From the console, run ifconfig to see the existing MTU, then change it
     
    cc
    ha
    advanced
    mtu$
    =2000
     
    or         =1500 

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML