Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 43 replies
  • Subscribers 4 subscribers
  • Views 19389 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[7.500][BUG][CONFIRMED] Webadmin Login fails

PabloDiablo
Hi all,
I just upgraded to V7.5 GA but I found an error/bug. I did the following:
- Imported the ESX V7.400 VM in vSphere
- Upgraded the from up2dates 7.401, 7.402, 7.403, 7.404, 7.405 and as last to 7.500
- When I log in WebAdmin, I get the following error:
  "Can't use an undefined value as a symbol reference at /PerlApp/core/modules/core_feed.pm line 45."
- I don't have a "display"
- Now I restore the config-file from V7.490, waited a few minutes and the error is now gone...

So eventually it works fine...


This thread was automatically locked due to age.
Parents
  • 0
    Okay, I got it sorted - I got a hint through another channel and that fixed the prob. To make the situatuion worse: the astaro is connected to the net but the DNS-Servers from our ISP wouldnt resolve the address of the admin-feed. Hint: use OpenDNS.

    tekuton
Reply
  • 0
    Okay, I got it sorted - I got a hint through another channel and that fixed the prob. To make the situatuion worse: the astaro is connected to the net but the DNS-Servers from our ISP wouldnt resolve the address of the admin-feed. Hint: use OpenDNS.

    tekuton
Children
  • 0 in reply to tekuton
    Add another user with the problem. Our ADSL service is intermittently failing due to water in the cable. Phone line is almost unusable.

    Webadmin hangs when the adsl service dies. Makes investigation very difficult, roll on 7.501.

    Off to disable the rss feed for the moment.

    Ian M

    XG115W - v20.0.3 MR-3 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Unfiltered HTML