Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 7 subscribers
  • Views 4101 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

High memory and swapping since update to Sophos UTM 9.714-4 resp. 9.715-3

Peter Engler

Hi

I use a Intel NUC with 8 GB Ram and Sophos UTM

Till version 9.713 the memory and swap usage was normal by 40% memory and 8% swap

After update to 9.715-3 the consummation of memory and swap goes high:

After restart httpproxy memory and swap goes to normal level:

Exist a memory leak problem in httpproxy?

Regards

Peter



This thread was automatically locked due to age.
Parents
  • 0

    As the forum discussed in another identical thread here, this is about the time that 64-bit items were inserted into UTM, ones that would specifically increase memory usage, as what 64-bit modes would do.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

Reply
  • 0

    As the forum discussed in another identical thread here, this is about the time that 64-bit items were inserted into UTM, ones that would specifically increase memory usage, as what 64-bit modes would do.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

Children
No Data
Unfiltered HTML