This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Astaro 8.201: NIC keeps going down

Hello,

Since installing 8.201 (over 8.103), my external kink keeps being marked as "down" by Astaro. I can bring it up again by taking the interface down and then up but that's not really a satisfactory solution.

The system is running in a VM (Hyper-V) and the interface is bridged to my DSL modem (it's listed as a "cable modem" in AStaro). This worked perfectly fine with 8.203. The hardware is fine (I can still use it from the host OS if I want), the other interface stays up and the external net is still working well.

Anyone has a suggestion on how to make Astaro behave before I lose patience and go back to 8.103 ?

This thread was automatically locked due to age.

Parents

0 Goldy_01 over 13 years ago

My ISP also force renew of IP address (four lines), but during the time i was running 8.200, I didn't noticed any of the issues you described here.
I seems to run OK.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Goldy_01 over 13 years ago

My ISP also force renew of IP address (four lines), but during the time i was running 8.200, I didn't noticed any of the issues you described here.
I seems to run OK.
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 StephaneGROBETY over 12 years ago in reply to Goldy_01

I'm bumping this again. I reinstalled a fresh 8.202 version and I have the same problem: there is definitely a rather serious bug in ASL 8.2xx concerning the handling of Hyper-V NICs when in "cable modem" mode.
Cancel
Vote Up 0 Vote Down

Cancel