Hi All,
We currently have a number of AP6 across our environment and have tried to deploy these at 40mhz, however when we do this they are setting at 80mhz which is causing them to interfere with each other.
Does anyone have any advice?
yeah tried that see attached pictures.
Assuming 136 is the channel, the AP6 selected?
Can you check the logging of the AP6, when you export the logs in central and check what channel the AP6 selected?
because it is true, if the AP6 selects 136 with 40 MHz, it would use 138 (136+140):
But if we selected 132, it is fine.
__________________________________________________________________________________________________________________
Assuming 136 is the channel, the AP6 selected?
Can you check the logging of the AP6, when you export the logs in central and check what channel the AP6 selected?
because it is true, if the AP6 selects 136 with 40 MHz, it would use 138 (136+140):
But if we selected 132, it is fine.
__________________________________________________________________________________________________________________
so i have set the AP to 132 as a test but it is still showing 80MHZ as the channel when we do a wireless inspection.
They are definitely Moving to the 80MHZ range. Even when manually changing the setting on the AP to the below it is still on the 80MHZ.
