Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 14 subscribers
  • Views 754 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

What is the interaction between an APX NAT Guest Wi-Fi centrally managed and the XGS Gateway?

walder peaky

HI,

My question is more academic in nature.

In my office, I am setting up a guest wireless network using SC-managed APXs, and it appears to be working. My NAT configuration isn't Bridged, but how does it go through the XGS? I don't see the address (or network) assigned by the APX's DHCP Server in the gateway, but clients can access the internet, so the address must be going through the gateway in some way.

In order to isolate the traffic, does it use a VLAN hidden from the administrators? Are there any XGS firewall rules that apply?

Thanks,



This thread was automatically locked due to age.
Parents
  • 0

    If you leave the default MASQ rule in place AND you allow traffic from the WiFi zone to the internet, this will work as you described.

    This default rule is not logged, afaik. So you will not „see“ anything in the logviewr.

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0

    If you leave the default MASQ rule in place AND you allow traffic from the WiFi zone to the internet, this will work as you described.

    This default rule is not logged, afaik. So you will not „see“ anything in the logviewr.

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML