This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

APX 320 access points having a hard time connecting

Is anyone else experiencing this: Randomly devices having a hbard time connecting to my APX 320 access point. I find that I have to reboot them on a regular basis to maintain a consistent ability to connect to them.

I had a look at the logs the other day and they showed this :

I don't know if it is related to the problem or not, but I thought I would share.

I manage the access points on the cloud at the moment, but i am thinking of moving them to the XG to see if it works better.

I have two SSID's setup. I am only using 2.4G.

All 3 access points are setup like this :

Thanks In advance,

Terry

This thread was automatically locked due to age.

Parents

0 LuCar Toni over 5 years ago

Why do you only using 2,4Ghz?

I mean, it would be helpful to keep the air clean by moving 5.0GHz capable clients to move to the better connection?

__________________________________________________________________________________________________________________
Cancel
Vote Up 0 Vote Down

Cancel
0 Terry Bennett over 5 years ago in reply to LuCar Toni

2.4G for Range and through cinder block walls. Is my thinking flawed?

Terry
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Terry Bennett over 5 years ago in reply to LuCar Toni

2.4G for Range and through cinder block walls. Is my thinking flawed?

Terry
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 LuCar Toni over 5 years ago in reply to Terry Bennett

APX320 is a dual band APX.

https://www.howtogeek.com/222249/whats-the-difference-between-2.4-ghz-and-5-ghz-wi-fi-and-which-should-you-use/

So basically you should take advantages in giving the Client the possibility to use 5.0 GHz.

__________________________________________________________________________________________________________________
Cancel
Vote Up 0 Vote Down

Cancel