Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 13 subscribers
  • Views 3398 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Mesh network on AP15C

Gluck

Hello,

We have Sophos UTM 9.5. And need to implement a mesh network.

Is it possible to create a mesh on AP15C only?

If no, can I create a mesh with AP55C + AP15C?

Unfortunately documentation is not so clear.

Thanks



This thread was automatically locked due to age.
Parents
  • 0

    According to XG help document

        Except for AP5 and AP10, all the APs can be used for broadcasting mesh networks

    But it also says

        Access points assigned to this netwrok will trnasmit the mesh network on the selected frequency band. it is a good idea to use a different frequency band for the mesh network than for the broadcasted wireless networks.

     

    AP55C definiely OK but AP15C is a single band AP so it has to use 2.4G band for both mesh and broadcasted wireless network.

Reply
  • 0

    According to XG help document

        Except for AP5 and AP10, all the APs can be used for broadcasting mesh networks

    But it also says

        Access points assigned to this netwrok will trnasmit the mesh network on the selected frequency band. it is a good idea to use a different frequency band for the mesh network than for the broadcasted wireless networks.

     

    AP55C definiely OK but AP15C is a single band AP so it has to use 2.4G band for both mesh and broadcasted wireless network.

Children
No Data
Unfiltered HTML