Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 19 replies
  • Answers 1 answer
  • Subscribers 42 subscribers
  • Views 63768 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Integrating an XG210 with an existing Ubiquiti Unifi Network with multiple VLANs.

Paul Schwegler

I am trying to integrate an XG210 into an existing network. The network is a full Ubiquiti Unifi setup and has multiple VLANs set up between the gateway and the switch. I would think I could place the XG in line on a trunk connection between the switch and the gateway. The end goal is to be able to filter the individual networks separately in regards to web filtering and scanning etc.

I have asked this question before and got a lead: "You would have to set up virtual interfaces for all the VLANs and bridge them accordingly." But was unsuccessful in making this work.

I am new to the XGs having come from sonicwall, so I am still a bit green when it comes to using the XG software. Can anyone give me a bit more detailed instructions, or at least a link or two to something to help me figure this out? Any help will be appreciated.



This thread was automatically locked due to age.
Parents
  • 0

    This posting was extremely helpful.  I was in the same boat.

    Did you get the your Unifi console to integrate with your UBNT community login and be able to access it remotely?  Obviously there are other ways via port forwarding, dynamic DNS, etc.  I've been struggling getting access remotely through the cloud portal even if I exempt all IPs and UTM in the firewall policies.

    I'm coming down to the point of just forwarding the ports since the log viewer in XG isn't the easiest to decipher.  I spent countless hours on it and it could be an issue on either end, but I'm seeing more trends coming in via bridge mode even with everything exempt.  (ex: PS4 remote play)

  • 0 in reply to MiniMeech

    I'm sorry, I'm not exactly sure what you are asking. I do not use the UBNT community portal, I host my own controller for myself and my clients in my site. My XG is in bridge between the USG and the switch, so there is no forwarding that needs to be done in the XG in terms of the unifi devices. All of the forwarding is done in the USG.

    I would recommend starting a new thread on the topic, referencing this thread if it was useful.

Reply
  • 0 in reply to MiniMeech

    I'm sorry, I'm not exactly sure what you are asking. I do not use the UBNT community portal, I host my own controller for myself and my clients in my site. My XG is in bridge between the USG and the switch, so there is no forwarding that needs to be done in the XG in terms of the unifi devices. All of the forwarding is done in the USG.

    I would recommend starting a new thread on the topic, referencing this thread if it was useful.

Children
No Data
Unfiltered HTML