Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 39 subscribers
  • Views 8417 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

No Acess after setting wizard to bridge mode

DAENG

I tried to set via the wizard tobridge mode, after that i have no acess anymore. Only 2 of the 8 lan ports are active and on both i have no acess. I checked the adress via console and everything is fine.

What can i do?



This thread was automatically locked due to age.
Parents
  • 0

    Daniel,

    make sure all the ports that belong to the bridge are connected. Go to console and type "system appliance_access enable" and see if you can access the web interface. After that make sure that ports and zone are correctly associated.

    Come back here and let us know.

    Thanks.

Reply
  • 0

    Daniel,

    make sure all the ports that belong to the bridge are connected. Go to console and type "system appliance_access enable" and see if you can access the web interface. After that make sure that ports and zone are correctly associated.

    Come back here and let us know.

    Thanks.

Children
Unfiltered HTML