Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 40 subscribers
  • Views 9933 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DHCP-Relay relay request for tagged and untagged

MarcoScholl

Hi

i have a problem with the dhcp relay. we have a red 50 with an interface thats tagged as 10. on the xg firewall we have a reds1 and reds1.10 interface with a dhcp relay.

when i now request an ip adress i got 2 request on dhcp server. one for reds1 and one for reds1.10. thats not good because the client can get an invalid ipadress.



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to MarcoScholl

    Hi Marco,

    Suspecting some configuration issue. May I have some setup details & red configuration details?

    There might be a chance wherein red device receiving two different dhcp requests tagged & untagged.

    Regards,

    Vishal Patel

  • 0 in reply to vishaljpatel

    The RED Port 1 is configured as "Hybrid Port" with VLAN(s) "9" and Port 2 is configured as "Untagged Port, drop tagged" with VLAN 10.

    Wenn i start dhcp request on Port 1 (as untagged), i can see the request on resd1 but i didn't get an dhcp answer on Port 1

    reds1, IN: IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from f0:de:f1:cd:18:a3 (oui Unknown), length 300
    reds1, OUT: IP 10.108.254.254.bootps > 10.108.4.245.bootpc: BOOTP/DHCP, Reply, length 300

    When i start dhcp request on Port 2 (as untagged), i can see the request on reds1 and reds1.2.

    On DHCP got requests from both relays

    test-dhcpd01.hostings.i22.de dhcpd: DHCPACK to 10.208.254.100 (f0:de:f1:cd:18:a3) via eth0
    test-dhcpd01.hostings.i22.de dhcpd: DHCPINFORM from 10.208.254.100 via 10.108.254.254

    test-dhcpd01.hostings.i22.de dhcpd: DHCPREQUEST for 10.208.254.100 from f0:de:f1:cd:18:a3 via 10.108.254.254: wrong network.
    test-dhcpd01.hostings.i22.de dhcpd: DHCPNAK on 10.208.254.100 to f0:de:f1:cd:18:a3 via 10.108.254.254

    reds1, IN: IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from f0:de:f1:cd:18:a3 (oui Unknown), length 310
    reds1, OUT: IP 10.108.254.254.bootps > 255.255.255.255.bootpc: BOOTP/DHCP, Reply, length 300 <- subnet of reds1
    reds1, OUT: IP 10.208.254.254.bootps > 10.208.254.100.bootpc: BOOTP/DHCP, Reply, length 300 <- subnet of reds1.2

    My Workaround -> Don't use hybrid port. All data should tagged, than works all fine. but i must configre a dummy ip for untagged reds1 interface

Unfiltered HTML