Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 4467 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Guidance on initial network config during setup process

KevinMort

v



This thread was automatically locked due to age.
Parents
  • 0
    one interface has a dhcp server and will give you a 172.16.16..0/24 address so you can access the gui. The other interface you configure so the XG can access the internet licence validation and activation.

    Ian,

    home UTM 9.x running in ESXi 6 e3-1275v2

    AP55c and AP10 (courtesy Astaro)

    Three other UTMs, SUM and SFM in hibernation

    XG 15.x MR3 in hibernation

Reply
  • 0
    one interface has a dhcp server and will give you a 172.16.16..0/24 address so you can access the gui. The other interface you configure so the XG can access the internet licence validation and activation.

    Ian,

    home UTM 9.x running in ESXi 6 e3-1275v2

    AP55c and AP10 (courtesy Astaro)

    Three other UTMs, SUM and SFM in hibernation

    XG 15.x MR3 in hibernation

Children
No Data
Unfiltered HTML