Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 41 subscribers
  • Views 16348 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem with Wireless Bridge an internal LAN

RolloBerger

Hello Guys,


i have a Problem with my Wireless Bridge on my XG-W. The Cable and Wireless Clients are in the same Subnet, but they can´t connect with each other. A Ping between the Clients isn´t possible, but a Networkscan can find the devices.

My Interface Configuration:

Port1=LAN - static IP - 192.168.0.254

Port2=WAN - DHCP from external Router - 192.168.179.10 / 24

Internal Wifi - Zone=Wifi

Bridge

Routing is enabled on this bridge pair

member interfaces

port1 - lan

sophos(wlan) - wifi


IPv4/Netmask 192.168.0.254 /24 255.255.255.0

Wireless

Wireless Network - Bridge to AP LAN

DNS

DNS from DHCP, no static DNS

DHCP

DHCP internal - interface is bridge (192.168.0.254)

IP Lease - 192.168.0.65 - 192.168.0.99 /24

Gateway - use Interface IP as Gateway

DNS - Use Device´s DNS Gateway

Firewall Policies

Default Policy - LAN, WIFI Any Host -> WAN Any Host - > Any Service

Bridge - LAN, Wifi # Bridge Any Live User -> LAN, WIFI # Bridge -> Any Service

Greetings,

rollo



This thread was automatically locked due to age.
  • 0

    Same problem, almost exactly, I just want to use external DNS and DHCP from our AD.

    Want to bridge the Built in WiFi to specific LAN interface to separate client LAN and WAN access

  • 0

    Hi Rollo,

    I had the same problem

    To solved it I followed the three steps there after

    - attach the "Internal Wifi" to an AP      . This will create a pseudo interface corresponding to the WifFi connections

    - attach the "Internal WiFi" Interface created before to the existing bridge or create a bridge including port 1  and Internal Wifi interface

    - verify all the IP trafic is available from one side to the other

    Enjoy

    Nicolas 

Unfiltered HTML