Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 40 subscribers
  • Views 9503 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DSL Modem Configuration Options

DanMiller

Can anyone tell me what the best way to configure a DSL modem (mine is ATT) and an XG-105 hardware.  I have 3 options for the modem itself.

  1. PPP on the DSL modem and configure XG as DHCP?
  2. PPP on computer > XG configured with username and password.
  3. Bridge Mode > "as I understand this"  XG acts as the DSL modem.

Whats the best way?  I was having dropped internet connections when I used option 2.  It's now configure as option 1.  I'm still having dropped internet, but not nearly as bad.  Should I change the modem to Bridge Mode?



This thread was automatically locked due to age.
  • 0
    In bridge mode the XG does the authentication, the modem is still the modem, the bridge mode does is pass the authentication to a more secure and managed device. In bridge mode you don't end up with a double nat situation and you can trace configuration faults. Options 2 and 3 are the same.

    Ian,

    home UTM 9.x running in ESXi 6 e3-1275v2

    AP55c and AP10 (courtesy Astaro)

    Three other UTMs, SUM and SFM in hibernation

    XG 15.x MR3 in hibernation

  • 0
    Ian, thanks for your help. I take it Bridge Mode is the best way to go?
Unfiltered HTML