Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 42 subscribers
  • Views 11250 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

I'm trying to install XG Firewall home and get the message "No Appliance hardware has been detected". I'm using a Biostar H61MHV Motherboard which has a LAN port, 4 gig memory, an Intel I3 processor and a PCI NIC adapter. Please help.

WilliamDonovan

No Appliance hardware has been detected



This thread was automatically locked due to age.
Parents
  • 0
    I suspect your problem is your NICs? The onboard NIC is a realtek and you didn't give any indictaion of your added NIC? Try a dual port intel based card.

    Ian,

    home UTM 9.x running in ESXi 6 e3-1275v2

    AP55c and AP10 (courtesy Astaro)

    Three other UTMs, SUM and SFM in hibernation

    XG 15.x MR3 in hibernation

Reply
  • 0
    I suspect your problem is your NICs? The onboard NIC is a realtek and you didn't give any indictaion of your added NIC? Try a dual port intel based card.

    Ian,

    home UTM 9.x running in ESXi 6 e3-1275v2

    AP55c and AP10 (courtesy Astaro)

    Three other UTMs, SUM and SFM in hibernation

    XG 15.x MR3 in hibernation

Children
No Data
Unfiltered HTML