Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Firewall Activation

Hi, I have tried to access 127.16.16.16 for the console but on the activate page it wont go to activate because the internet connection cant pass through our kerio control with the 127. address. I first ipconfig > release > renew till I get the dhcp from ESXi then I get something like 127.16.16.20. This gets into the console but cant get through to internet.

Please advice.



This thread was automatically locked due to age.
Parents
  • If you have WiFi in your network to get to internet, you can stay connected to the WiFi and by this you will be having Internet connection to your workstation and connect the XG with your LAN by configuring the static IP address in range of 172.16.16.0/24 by not assigning the Default gateway on on it.

    By doing this all your internet will go from the WiFi and you can get to the XG registration page by navigating to https://172.16.16.16:4444, as to sync the licencing its necessary to have the Internet connectivity on workstation from where we are accessing the XG , for the very first time.

    With Best Regards,
    Axar Patel
Reply
  • If you have WiFi in your network to get to internet, you can stay connected to the WiFi and by this you will be having Internet connection to your workstation and connect the XG with your LAN by configuring the static IP address in range of 172.16.16.0/24 by not assigning the Default gateway on on it.

    By doing this all your internet will go from the WiFi and you can get to the XG registration page by navigating to https://172.16.16.16:4444, as to sync the licencing its necessary to have the Internet connectivity on workstation from where we are accessing the XG , for the very first time.

    With Best Regards,
    Axar Patel
Children