Help us enhance your Sophos Community experience. Share your thoughts in our Sophos Community survey.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 19 replies
  • Answers 1 answer
  • Subscribers 44 subscribers
  • Views 68062 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

172.16.16.16 not working

pmolan

Right now I have UTM9 on a dell 2950..  No issues.

I bought 2 Dell 1950 servers from craigslist mainly because they were cheap and I like to play with this stuff.  I installed Pfsense on one of them and I have basic WAN/LAN functionality.   I installed XG on the other but have no access  to https:://172.16.16.16:4444.  I set my laptop to 172.16.16.1, 255.255.255.0.  Thinking possibly there was something wrong with my craigslist find, I installed XG on the other server, overwriting the working pfsense.  Still no access to the web gui.

I tried both ports.

I tried the ping 172.16.16.16 -t trick

I tried booting up with WAN in one and Laptop in the other.

I waited 4 hours.

Not working

Nic card:

Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet

This appears to be the same model Nic as the 2950 which is currently working with UTM9

Any thoughts?



This thread was automatically locked due to age.
Parents
  • 0
    I did an experiment. I installedUTM9 on that server and still had no access to the management page. Pings did not respond either. Both eth0 and eth1 did not function as intended. I installed a second NIC, Intel this time, eth2 and eth3 and assigned the management to eth3. I got in on eth3 after install.
    I assigned lan addresses to eth0 and eth1 on the Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet. It functions correctly.
    Maybe there is something broken in the install package? I know the Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet works because I have used to for 2 years on my other 2950.
Reply
  • 0
    I did an experiment. I installedUTM9 on that server and still had no access to the management page. Pings did not respond either. Both eth0 and eth1 did not function as intended. I installed a second NIC, Intel this time, eth2 and eth3 and assigned the management to eth3. I got in on eth3 after install.
    I assigned lan addresses to eth0 and eth1 on the Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet. It functions correctly.
    Maybe there is something broken in the install package? I know the Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet works because I have used to for 2 years on my other 2950.
Children
No Data
Unfiltered HTML