Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 43 subscribers
  • Views 19773 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hardware requirements/Compatibility

MauriceArney

Are the hardware requirements the same for XG firewall as for UTM 9?  I have an intel machine that had been running UTM 9.3 with no problems.  However, when I install XG firewall from the iso, the system will not start.  The installation completes with no errors but after removing the install disk and rebooting, it "hangs" with a black screen and blinking cursor.  It looks like a hardware issue.



This thread was automatically locked due to age.
Parents
  • 0
    By default you would assume 64 bit because maximum memory a home user will be able to use is 6gb. 32 bit cannot access more than about 3.8gb of ram.

    Ian,

    home UTM 9.x running in ESXi 6 e3-1275v2

    AP55c and AP10 (courtesy Astaro)

    Three other UTMs, SUM and SFM in hibernation

    XG 15.x MR3 in hibernation

Reply
  • 0
    By default you would assume 64 bit because maximum memory a home user will be able to use is 6gb. 32 bit cannot access more than about 3.8gb of ram.

    Ian,

    home UTM 9.x running in ESXi 6 e3-1275v2

    AP55c and AP10 (courtesy Astaro)

    Three other UTMs, SUM and SFM in hibernation

    XG 15.x MR3 in hibernation

Children
No Data
Unfiltered HTML