Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 43 subscribers
  • Views 19773 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hardware requirements/Compatibility

MauriceArney

Are the hardware requirements the same for XG firewall as for UTM 9?  I have an intel machine that had been running UTM 9.3 with no problems.  However, when I install XG firewall from the iso, the system will not start.  The installation completes with no errors but after removing the install disk and rebooting, it "hangs" with a black screen and blinking cursor.  It looks like a hardware issue.



This thread was automatically locked due to age.
Parents
  • 0
    I had a similar problem installing XG firewall on a 32-bit Intel box. After installing the XG software, removing the install cd, and rebooting, it gives an error saying

    "This kernel requires an x86-64 CPU, but only detected an i686 CPU - please use a kernel appropriate for your CPU"

    From what I can tell though, there is no .iso installation file available for a 32-bit CPU. None of the documentation suggests that a 64-bit server is needed for this software.
Reply
  • 0
    I had a similar problem installing XG firewall on a 32-bit Intel box. After installing the XG software, removing the install cd, and rebooting, it gives an error saying

    "This kernel requires an x86-64 CPU, but only detected an i686 CPU - please use a kernel appropriate for your CPU"

    From what I can tell though, there is no .iso installation file available for a 32-bit CPU. None of the documentation suggests that a 64-bit server is needed for this software.
Children
Unfiltered HTML